The overall crystallization behavior of polyethylene/wax blends as phase change materials for thermal energy storage: A mini review

This review paper deals with the overall crystallization behavior of polyethylene/wax blends as phase change materials (PCMs) for thermal energy storage with the determination of their thermal properties. The addition of molten wax to the polyethylenes decreases the crystallization and melting temperatures of the blends. However, incorporating fillers to the polyethylene/wax blends can either decrease or increase the crystallization and melting temperatures of the composites depending on the filler type. The normalized enthalpy values of linear low-density polyethylene showed no significant change when increasing the wax content. On the contrary, the normalized enthalpy values of the wax in the blends were lesser than that of pure wax and increased with increasing wax content. Since the wax in the blend had a lower crystallinity compared to pure wax, this influences its effectiveness as a PCM for thermal energy storage. The effect of different polyethylenes on the wax morphology gave rise to enhance phase separation when wax was blended to high-density polyethylene as compared to the other polyethylenes. On the contrary, the effect of various waxes on the morphology of polyethylene resulted in different morphologies due to the molecular weight of the wax used and the structure of the polyethylene chain. The addition of fillers to the polyethylene (PE)/wax samples resulted in enhanced phase separation. The overall isothermal crystallization rate and the equilibrium melting temperature of PEs in the PEs/wax blends were depressed by wax addition due to the wax dilution effect.     

Comprehensive analysis on anomalous phenomenon of ethanol-soluble poly(vinyl butyral) membrane for ethanol recovery via pervaporation

Poly(vinyl butyral) (PVB) is selected as a promising ethanol-permselective membrane based on the solubility parameter theory; however, it exhibits anomalous water perm-selectivity in practical pervaporation (PV) process. Comprehensive analysis based on experimental and theoretical methods were carried out to explore the inherent mechanism of the anomalous performance. Firstly, sum frequency generation vibrational spectra and contact angle were developed to quantify the surface reconstruction of membrane in air and ethanol, which indicated that hydrophilic hydroxyl tended to expose on membrane surface with ethanol thus improving the membrane affinity to water. Meanwhile, swelling behaviors proved more water would accumulate in the ethanol swollen membrane. Furthermore, theoretical analysis in terms of sorption and diffusion process, based on the UNIFAC-FV model and Fujita free-volume theory, confirmed the mechanism of anomalous phenomenon of PVB membrane. The comprehensive investigation was expected to provide insights into the basic separation mechanism of PV process.     

时间效应在悬滴法测定表面张力中的影响

表面张力是流体重要的物理性质,测定表面张力的方法通常包括毛细管上升法、最大气泡压力法、拉环法、旋滴法和悬滴法等。目前,最普遍的表面张力的测定方法为国家标准推荐的平板法或拉环法。然而,悬滴法作为一项成熟的表面张力测定方法且具备静态表面张力及动态表面张力测定功能,目前使用该法测定的较少。文章使用悬滴法测定较低含量的表面活性剂溶液静态表面张力时发现结果与拉环法差异较大,而测定单组分液体及含量较大的表面活性剂溶液,悬滴法与拉环法的测定数据差异较小,这种情况的相关报道较少。另外,使用动态表面张力测定探索了静态测定时出现差异的原因,并对应用悬滴法进行表面张力测定的适用范围进行了总结。使用悬滴法测定表面张力时,应注意时间效应的影响。     

Anatomical and physiological considerations in scleral lens wear: Eyelids and tear film

Scleral lenses can affect a range of anterior segment structures including the eyelids and the tears. The eyelids, consisting of the outer skin layer, the middle tarsal plate, and the posterior palpebral conjunctiva, provide physical protection and house the meibomian glands and cilia which have important and unique functions. Tears consist of a mix of aqueous, mucus, and lipidomic components that serve vital functions of lubricity, protection, and nourishment to the ocular surface. Both the eyelids and the tear film interact directly with scleral lenses on the eye and can affect but also be impacted by scleral lens wear. The purpose of this paper is to review the anatomy and physiology of the eyelids and tear film, discuss the effects and impacts of the scleral lenses on these structures, and identify areas that require further research.     

响应面法优化农产品中抗性淀粉的体外检测

目的 采用响应面法优化农产品中抗性淀粉(Resistant Starch, RS)的体外检测方法。方法 选择谷类、薯类、豆类3类抗性淀粉主要来源的农产品，设计单因素试验和Box-Behnken试验。单因素试验考察了水浴时间、淀粉葡萄糖苷酶（AMYLOGLUCOSIDASE, AMG）作用温度、AMG作用时间、AMG添加量和离心力与离心时间5个条件，并选择AMG作用温度、AMG作用时间、AMG添加量来设计Box-Behnken试验。结果 根据单因素试验，确定了水浴时间为14 h，离心条件选择4500 g离心5 min；根据响应面实验确定对RS含量检测结果影响程度排序为AMG添加量＞AMG作用时间＞AMG作用温度。结合单因素响应面试验，确定最佳检测方法为水浴14 h，4500 g离心5 min，AMG作用温度49℃、AMG添加量0.2 mL、AMG作用时间38 min。结论 优化后的方法重复性良好，适用于玉米、马铃薯和红豆3类样品，且有望适用于其他主要农产品。     

Analytical estimation of energy dissipations: Viscous,Joulian, and Darcy of viscoelastic fluid flow phenomena over a deformable surface

In this paper, analytical estimation of energy dissipations, such as viscous, Joulian, and Darcy dissipation of viscoelastic flow phenomena over a deformable surface has been presented. This supplement to the study of many transport processes, which occur in nature, and various experimental setups that are driven or modified by the composition of the various flow characteristics and material or phase constitution. These processes are very important and have received considerable attention in the literature. The estimation of dissipative energy in the process of transport energy is an important phenomenon to investigate. The present analysis is carried out on steady MHD viscoelastic liquid due to deformable domains. Moreover, the impact of internal heat sources and prescribed thermal conditions, such as surface temperature and heat flux, are carefully studied. Analytical solutions to governing equations are obtained with the help of Kummer's function. The solutions are presented graphically as well as in tables to estimate the energy losses and their effects on transport processes, which serve as the salient features of the current analysis. The outcomes serve as a guideline due to the process of transport properties as per the design requirements. Looking into the current scenario, dissipative heat energies have several applications in industries and technological processes, such as electric heaters, fuses, food processing, and several others.     

基于响应曲面法的涡轮增压器废气阀门激光焊接工艺优化研究

激光焊接技术凭借其高效、高精度的特点已广泛应用在汽车制造产业,在涡轮增压器的生产中,激光焊接也逐步被应用于实现废气阀门与阀杆的连接。虽然当前对于激光焊接的工艺研究很多,但对工艺参数的优化也一直缺少一个科学有效的方法。本文以熔接深度、熔接宽度和内部缺陷作为响应变量,选取焊接功率、焊接速度作为因子,运用响应曲面法(RSM)设计实验方案,通过对响应结果进行分析,研究焊接参数对焊接质量的影响,拟合能够预测最优参数的数学模型,最终将获得的最优参数运用到生产中进行验证。     

饱和尾粉砂边界面模型在FLAC3D中的开发

由于岩土材料的复杂性，FLAC3D软件自带的本构模型不能满足实际数值分析的全部要求。利用FLAC3D预留的UMD接口，在C++的编译环境下实现了一种基于临界状态模型CASM边界面模型的开发。介绍了边界面模型的基本组成，给出了开发的关键步骤。并基于三轴试验结果，利用该模型对饱和尾粉砂静/动力学特性进行了分析，论证了该模型对饱和尾粉砂的适用性。     

Damage of the ocular surface from indoor suntanning—Insights from in vivo confocal microscopy

PurposeTo evaluate the ocular surface at the microstructural level of adults who habitually undertake indoor-suntanning utilising in vivo confocal microscopy.MethodsParticipants were prospectively recruited and enrolled into either а study group (n = 75) with a history UV indoor tanning, or a control group (n = 75) with no prior history of artificial tanning. The study group participated in voluntary tanning sessions performed with standard equipment and maintained their usual routine for eye protection. Slit lamp biomicroscopy and in vivo confocal microscopy were performed at baseline before undertaking a series of suntanning sessions (10 sessions of 10 min duration over a 15 day period), within three days after the last session, and four weeks after the last session. Control group participants were examined at baseline and 8 weeks later and did not participate in tanning sessions.ResultsAll participants were female with a mean age of 25 ± 4 years and 24 ± 4 years in the study and control groups, respectively. No clinically significant changes were observed in either group over time using slit lamp biomicroscopy (all p ≥ 0.05), however, statistically significant differences were observed between the study and the control group for all corneal layers imaged using confocal microscopy (all p ≤ 0.03). Characteristic cystic conjunctival lesions with dark centres and bright borders were observed in 95% of the study group before and in 100% after the suntanning sessions.ConclusionIndoor suntanning resulted in statistically significant microstructural changes in the cornea and the bulbar conjunctiva that are undetectable with slit lamp biomicroscopy.     

基于改进LFM算法的主动解列断面搜索方法

针对传统解列断面算法复杂度高的问题,提出一种基于改进LFM算法的解列断面搜索方式。首先,基于节点间电气联系和能量转移分布熵完成电网加权复杂网络建模;其次,基于主动解列断面约束条件,对LFM算法做适应性改良;最后,通过改进LFM算法得到解列断面,并在IEEE39节点系统中验证了算法有效性。仿真结果表明,改进LFM算法可充分考虑传统解列断面的约束条件,在算法具有较低复杂度的同时对系统运行状态更强的适应性。